We not only help our clients reduce their costs…… we also help them solve their customer's problems.

Case Study 1
A sensor manufacturer whose client was having signal intermittency problems contacted Thermocouple Connector Source for assistance.

Case Study 2
An automotive vehicle and engine test facility were using duplex TCs with two separate mini connectors on each sensor.

Case Study 3
One customer needed a more cost effective and simpler alternative to the wire clamp brackets for mini and standard connectors that are used with PVC jacketed coil cords and other similar extension wire.

 

Case Study 4
Many companies have corrosion issues when “J” calibration plugs and jacks are exposed to high humidity. The iron leg often rusts severely enough to cause signal errors or even open circuits. 

 

Case Study 5

A client called TCS and requested a significant number of assembled jack panels, in a rush. These assembled panels would be mount on stainless steel terminal boxes and shipped to the field as soon as possible.

 

Case Study 6

All our clients have commented favorably on our captured cover screw feature used on the standard connectors. In some cases even their clients have stipulate that this is the only design they will accept.

 

Case Study 7

Finally a Miniature Isolated Programmable Connector Mounted Transmitter for High Accuracy and Affordable RTDs.

 

Case Study 8

Introducing the RTD-TD, a high accuracy, highly visible digital display with 4-20mA output and optional local alarm. Designed exclusively for temperature sensor manufacturers.